Kitchen Fitter · قالب عرض سعر

قالب عرض أسعار تركيب مطابخ مجاني

قالب عرض أسعار احترافي لفنيي تركيب المطابخ. فصّل الوحدات وأسطح العمل وتوصيلات الأجهزة — نزّل PDF بعلامتك التجارية في أقل من دقيقة.

Decide upfront whether appliances are customer-supplied or ones you're sourcing, and mark it clearly on the quote. A customer who buys their own oven and finds it doesn't fit the cut-out you built the units around will blame the fitter, not the appliance choice. Note exact appliance dimensions and model numbers on the quote to protect yourself before the units are even ordered.

Worktop templating deserves its own line, priced separately from carcass fitting. It typically happens after units are installed and before the worktop is cut, which means a second site visit with its own travel time. Folding it silently into a flat "kitchen fitting" price makes it invisible and easy to underprice when a job runs to two visits instead of one.

A kitchen fit rarely stays inside one trade. Plumbing for the sink and dishwasher, and an electrician for new sockets and under-unit lighting, both need to happen at specific points: first fix before units go in, second fix after. State clearly which trades you're coordinating directly and which the customer needs to arrange themselves, so nobody discovers a missing electrician mid-installation.

Removing and disposing of the old kitchen is real, billable labour and van space, not a courtesy. Skip hire or tip runs cost money and time either way. Price it as its own line so a customer comparing your quote against one that quietly excludes disposal is comparing like for like, instead of assuming yours is more expensive for the same job.

ما يتضمنه هذا القالب

  • الوحدات والهياكل مسعّرة منفصلة عن أجرة التركيب
  • قياس وتركيب سطح العمل كبند منفصل
  • توصيل الأجهزة والتنسيق مع الحرف الأخرى موضّح
  • إزالة المطبخ القديم والتخلص منه
  • تنزيل PDF أو رابط مشاركة قابل للتتبع

Full guide

How to Start a Kitchen Fitting Business as a Sole Trader

الأسئلة الشائعة

كلاهما ممكن، لكن حدّد ذلك صراحة وسجّل أرقام الموديلات والأبعاد في العرض — عدم تطابق الجهاز مع الفراغ المُعدّ له هو النزاع الأكثر شيوعًا في تركيب المطابخ.

يتم القياس عادة في زيارة ثانية بعد تركيب الوحدات، بوقت تنقل وعمالة خاصين بها. تسعيره بشكل منفصل يعكس البنية الحقيقية ذات الزيارتين لمعظم أعمال المطابخ.

إما أن تنسّق معهما مباشرة أو يرتّب العميل ذلك بنفسه — حدّد ذلك في العرض حتى لا يفوت توقيت التمديدات الأولية والنهائية.

معاينة مباشرة

Your Business Name
+44 20 1234 5678
12 Example Street London EC1A 1AA
Quote
Q-1042
11 أغسطس 2026
صالح حتى 10 سبتمبر 2026
الفوترة إلى
Mr & Mrs Whitfield
[email protected]
العمل
Full kitchen refit — units, worktop, appliance connections
الوصف
الكمية
وحدة
الإجمالي
Units
Base and wall units, 4.2m run
1
‏2,400.00 UK£
‏2,400.00 UK£
Worktop
Worktop templating and installation
1
‏650.00 UK£
‏650.00 UK£
Labour
Fitting labour (3 days)
3
‏220.00 UK£
‏660.00 UK£
Disposal
Old kitchen removal and disposal
1
‏180.00 UK£
‏180.00 UK£
Units‏2,400.00 UK£
Worktop‏650.00 UK£
Labour‏660.00 UK£
Disposal‏180.00 UK£
المجموع الجزئي‏3,890.00 UK£
الضريبة (20%)‏778.00 UK£
الإجمالي‏4,668.00 UK£
ملاحظات

Customer-supplied oven and hob (dimensions confirmed). Plumber and electrician coordinated for first/second fix. Old kitchen removal and disposal included. Quote valid 30 days.

تعليمات الدفع

Bank: Example Bank Sort code: 00-00-00 Account: 12345678

شكراً لتعاملكم معنا.
Generated by billsend.net · Your Business Name

نسختك المخصصة ستستخدم شعارك وألوانك وتفاصيل عملك.

قوالب مجانية أخرى

أرسل أول quote لك اليوم

الخطة المجانية تبقى مجانية للأبد. لا حاجة لبطاقة ائتمانية. ملفات PDF بعلامتك التجارية في 60 ثانية.

ابدأ مجانًا